 
|
Winglets
for Glasflügel 304
| |
After extensives research work and testing we are
pleased with our results - winglets for the Glasflügel 304.
 They are not only a
eye-catcher but also improve the sailplane's
flight characteristics in the following ways:
- The minimum speed is lower
- The directional control is better
- The stall behaviour in straight flight and in a banked turn
is more docile
- The aileron response is improved even during the take-off
and landing run
We offer this winglet retrofit kit for
Glasflügel 304 in high Streifeneder quality.
The winglets, which are constructed from carbon fibre
reinforced plastic and only slightly heavier than the original wing tips, have a robust
connection to the wing. They are rigged in seconds and secured in place by a spring
loaded pin. There are no loose parts. The original wing tips may still
be used.
Ofcourse, we can
modify your glider with the winglets
in our workshop
|
| |
Winglet retrofit kit
 contains
- TN 304 and additional flight manual page
- 1 pair of winglets (unfinished)
- 1 pair of winglet connecting ribs (CFRP)
- 1 pair of wing tip connecting ribs (GFRP)
- 1 pair of wing tip skids
Excl. costs for modification and installation |
| |
|
| |
Price |
€ 2.677,50 |
€ 3.186,23 |
|
|
|
| |
|
vithout VAT |
incl.VAT 19%* |
|
|
|
Winglets for
Standard Libelle, Club Libelle and Hornet (apart from Hornet C - 'Kohle-Hornet')
|
After extensive research work and testing we are very
pleased with our results - winglets for the Standard Libelle, Club Libelle and Hornet
They are not only an
eye-cather, but also improve the sailplane's
flight characteristics in the following ways:
- The minimum speed is lower
- The directional control is better
- The stall behaviour is straight flight and in a banked turn
is more docile
- The aileron response is improved even during the take-off
and landing run
We offer this winglet retrofit kit for Standard Libelle,
Club Libelle and Hornet in high Streifeneder quality. The winglets, which are constructed from carbon fibre
reinforced plastic and only slightly heavier than the original wing tips, have a robust
connection to the wing. They are rigged in seconds and secured in place by a spring
loaded pin. There are no loose parts. The original wing tips may still used.
Ofcourse, we can
modify your glider with the winglets in our workshop.
|
|
Winglet retrofit kit
contains
- TN 201-30 or TN 206-20 and additional flight manual page
- 1 pair of winglets (unfinished)
- 1 pair of winglet connecting ribs (CFRP)
- 1 pair of wing tip connecting ribs (GFRP)
- 1 pair of wing tip skids
Excl. costs for modification and installation |
 |
|
price
|
€ 2.310,00
without VAT
|
€
2.748,9
incl. VAT 19%*
|
|
|
|
Winglet
protection bags
for Libelle und Hornet winglets in attractive
design:
material: Supra-Tex, padded
colour: grey
|
 |
| price |
€ 178,86
without VAT
|
€
212,84 €
incl. VAT 19%*
|
| |
|
|
|
*The stated prices including VAT refer only to
deliveries within Germany.
For deliveries to EU countries, the respective VAT
rate of the recipient country applies.
|
|
